BMW Engine Specialists
BMW X3 xDrive 28d Specialists (UK)

BMW X3 xDrive28d Engine Supply and Fit for Birmingham and the West Midlands

UK
Don't have the Reg?
Reconditioned and used N47 engines backed by a 6-month warranty
N47 timing chain repair and replacement
Rebuild or replace advice upfront
West Midlands drivers welcome

Specialist Help for the BMW X3 28d Engine and Its Well-Known N47 Timing Chain

The BMW X3 xDrive28d engine is BMW's 2.0-litre N47 diesel, best known for its rear-mounted timing chain. We supply and fit reconditioned, used and rebuilt N47D20 engines, and we repair timing chain faults before they cause major damage.

Understanding the N47D20C Engine in the F25 X3 xDrive28d

The X3 xDrive28d (F25) was sold mainly in the US, from around 2014 to 2016, but its engine is familiar to UK owners. It uses the N47D20C, a 2.0-litre four-cylinder turbo diesel rated at around 180–184hp (134–135kW). The engine is paired with xDrive all-wheel drive and an 8-speed Steptronic gearbox. In the UK, the same engine powered the pre-facelift X3 xDrive20d. We match every replacement to your car's exact engine code and specification.

Rebuild or Replace? Advice Based on the Damage

An N47 timing chain failure can be anything from a stretched chain caught early to bent valves and damaged pistons. We inspect first, then compare rebuild and replacement costs honestly, so you can choose the right option for your X3.

Catching Timing Chain Problems Before They Get Worse

A rattle from the back of the engine is often the first warning sign. Diagnosing it early can turn a potential engine replacement into a timing chain repair. If your X3 28d is making unusual noises, book an inspection before driving it any further.

BMW X3 xDrive28d and N47 Engine Services We Offer

These are the jobs X3 28d and N47 owners need most, from timing chain replacement to full engine supply and fit. Each one starts with an inspection and a clear quote, and no work begins without your approval.

Replacement Engine Supply and Fit

When an N47 has suffered serious internal damage, often after timing chain failure, a replacement engine is usually the most practical solution. We source a compatible N47D20 unit, transfer or renew the ancillaries, and fit it with care around the xDrive components. The engine then gets fresh oil, filters and coolant, a fault-code check and a road test. Your BMW X3 28d engine supply and fit quote covers the engine and labour together.

N47 Rear Timing Chain Replacement and Repair

The N47's timing chain is mounted at the rear of the engine, against the gearbox, so replacing it normally means taking the engine out of the car. Wear in the chain and its guides causes a rattle from the back of the engine, usually most noticeable at idle or as the revs drop. If it's left, a guide can break up and the chain can snap, causing serious valve and piston damage. We replace the chain, guides, tensioner and associated seals using the latest-revision parts available. We then check the timing and run the engine before returning your X3.

Reconditioned and Used N47D20 Engines

A reconditioned N47D20 engine is stripped, inspected and rebuilt with new wear parts, including a new timing chain kit, then tested before fitting. A used, low-mileage engine costs less, and we check it for timing chain noise, oil condition and leaks before supply. A compatible unit can come from an X3 xDrive20d, or from another N47D20 model such as the 328d once the sump and ancillaries have been checked. Both options carry our 6-month warranty.

Engine Rebuilds

If the damage is contained, rebuilding your existing N47 can be the best-value route. A BMW X3 28d engine rebuild usually includes a new timing chain kit, plus replacement of any damaged valves, pistons or bearings. We strip the engine, measure wear and quote for the parts it needs. If the cost gets close to a replacement, we'll explain both options clearly before you decide.

Swirl Flap Repairs

The N47 uses intake swirl flaps to manage airflow at low engine speeds. Over time, carbon build-up and actuator wear can make the flaps stick, which leads to rough running, loss of power and fault codes. We inspect the intake manifold and the actuator, clean or replace parts as needed, and clear the faults. Dealing with swirl flap problems early keeps the engine running smoothly and avoids further damage to the intake.

Glow Plug Replacement

Hard starting in cold weather, rough running at start-up and warning lights can point to failed glow plugs or a faulty glow plug control unit. On a high-mileage N47, plugs can seize in the cylinder head, so we remove them carefully to avoid damaging the threads. We test the control unit before replacing any parts and confirm cold starting afterwards.

Turbo and Head Gasket Repairs

Loss of power, whistling or smoke can point to turbo failure, which is often linked to oil supply problems or contamination. We check the feed and return lines before fitting a replacement turbo. Coolant loss, overheating or white smoke may instead indicate a head gasket or EGR cooler problem. We diagnose the cause before any repair, so your X3 28d gets the right fix rather than parts replaced on guesswork.

N47 Engine Specialist for X3 Owners in Birmingham and the West Midlands

Our workshop is in West Thurrock, Essex (RM20 4EL). We work with X3 owners from Birmingham, Solihull, Wolverhampton, Coventry and Walsall who want a dedicated N47 engine specialist.

Getting Your X3 28d to Our Workshop

If your car is driveable, you can bring it down via the M6, M1 and M25 at a booked time. If your X3 has a timing chain rattle, a failed engine or warning lights, don't drive it any further. Call us to discuss transport options to the workshop. We keep you updated from diagnosis through to collection.

6-Month Warranty on Every Engine We Fit

Reconditioned and used N47D20 engines that we supply and fit in the BMW X3 xDrive28d carry a 6-month warranty. If a covered fault appears during that time, contact us and we'll inspect the car and explain the next steps. Ask for the full terms before booking.

6-Month N47 Engine Warranty

Every reconditioned and used N47 engine we supply and fit in an X3 28d includes six months of cover.

Cover Includes
  • 6-month warranty on reconditioned and used engines
  • Timing chain noise checked before fitting
  • Road test and fault-code check after fitting
Making a Claim
  • Contact our team with your registration and a short description of the problem. We'll inspect the car at our workshop and explain clearly what happens next.

N47 Timing Chain and BMW X3 28d Engine Questions Answered by Our Specialists

Practical answers for X3 xDrive28d owners researching N47 engine problems and repair costs.

It depends on whether the chain can be replaced before any damage occurs, or whether the engine needs a rebuild or replacement. Because the engine usually has to come out, labour makes up a significant part of the cost. Send us your registration and symptoms for a clear quote.
The most common sign is a rattle or whirring noise from the rear of the engine, usually heard at idle or as the engine slows down. Timing-related fault codes can also appear. If you notice either, stop driving and book an inspection, because chain failure can destroy the engine.
It uses the N47D20C, a 2.0-litre four-cylinder turbo diesel rated at around 180–184hp, with xDrive all-wheel drive and an 8-speed Steptronic gearbox. The same engine was used in the UK's pre-facelift X3 xDrive20d.
The xDrive28d was offered from roughly 2014 to 2016, mainly in the US market. In the UK, F25 X3s used the N47D20C in the xDrive20d until the 2014 facelift, when BMW switched to the newer B47 engine.
If the chain failed at low speed and the damage is limited to the valves, a rebuild can be good value. If the pistons, cylinder head or bottom end are badly damaged, a reconditioned or used replacement is usually the more sensible choice. We'll inspect the engine and advise you.
Reconditioned and used N47D20 engines that we supply and fit come with a 6-month warranty. If a covered fault appears, contact us and we'll inspect the car at our workshop. Ask for the full terms when you request a quote.

Hearing a Timing Chain Rattle or Facing an N47 Engine Failure? Get a Clear Quote for Your BMW X3 xDrive28d Engine Today

Send us your registration, mileage and a short description of the symptoms. We'll confirm the correct N47D20 engine, explain whether a timing chain repair, a rebuild or a replacement makes most sense, and give you a clear quote. X3 owners from Birmingham and across the West Midlands are welcome.

Vogue Technics | | UK-Wide Service
IGA Independent Garage AssociationCTSI Approved CodeRAC Approved Garage
Chat Now!